BRSBS - RESURFACER 3000 POWDER, 0380730
- MSDS: BRSBS
- Manufacturer: ATLAS MINERALS AND CHEMICALS INC
- Product Name: RESURFACER 3000 POWDER, 0380730
- National Stock Number: 8040-00N016909
Product Identification
Product ID:RESURFACER 3000 POWDER, 0380730
MSDS Date:10/21/1987
FSC:8040
NIIN:00N016909
MSDS Number: BRSBS
Responsible Party
MERTZTOWN, PA 19539-0038
US
Emergency Phone: 215-682-9123;215-682-7171
Info Phone: 215-682-9123;215-682-7171
Cage: 04503
Contractor
Telephone: 215-682-7171
Cage: 04503
Ingredients
SILICON DIOXIDE, AMORPHOUS; (SILICA)
CAS: 7631-86-9
Fraction By Weight: 70-80%
OSHA PEL N/K
ACGIH TLV: N/K
SILICATE, PORTLAND CEMENT
CAS: 65997-15-1
RTECS: VV8770000
Fraction By Weight: 20-30%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CONTACT CAUSES
IRRITATION. SKIN: CONTACT MAY CAUSE IRRITATION. INHAL: INHAL MAY
CAUSE IRRITATION OF THE RESPIRATORY TRACT. CHRONIC EFTS OF OVEREXP:
RPTD/LONG TERM INHALATION OF DUSTS MAY CAUSE PERMANENT LUNG DAMAGE
(SILICOSIS). CHRONIC LUNG SCARRING MAY LEAD TO A MASSIVE FIBROSIS &
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: OTHER RESPIRATORY INFECTIONS.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS, ALLERGIES.
First Aid
First Aid:EYES: FLUSH WITH CLEAN WATER FOR AT LEAST 15 MINUTES. IF
IRRITATION PERSISTS, GET MEDICAL ATTENTION. SKIN: WASH CONTACT AREA
WITH MILD SOAP AND CLEAN WATER. IF IRRITATION OR SWELLING DEVELOPS,
GET MED ICAL ATTENTION. INHAL: REMOVE TO FRESH AIR. INGEST: CALL MD
IMMED .
Fire Fighting
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:MAY BE SWEPT OR VACUUMED FROM AREA. WEAR
NIOSH/MSHA APPROVED RESPIRATORY PROTECTION. FLUSH AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY PLACE. APPLY
NORMAL GOOD INDUSTRIAL AND PERSONAL HYGIENIC PRACTICES. DO NOT TAKE
INTERNALLY. FOR INDUSTRIAL USE ONLY.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED DUST MASK OR ALL PURPOSE
CANISTER MASK OR CHEMICAL CARTRIDGE MASK, IF CONDITIONS SO DICTATE.
Ventilation:LOCAL: ADEQUATE TO PREVENT MIGRATION OF DUST. MECHANICAL:
ACCEPTABLE.
Protective Gloves:PLASTIC/RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:2
Solubility in Water:SLIGHTLY SOLUBLE
Appearance and Odor:OFF WHITE GRANULES WITH MILD ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH APPLICABLE LOCAL,
STATE AND FEDERAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.